What To Do When Your Washing Machine Not Draining?
If your washing machine is not draining, you are likely to experience a number of problems. Water can damage your flooring, furniture, and other possessions. In addition, a washer that doesn’t drain properly can cause mold and mildew to grow in the unit-leading to dangerous health risks. If you are experiencing this problem, don’t panic! We have put together a comprehensive guide that will show you how to fix your washing machine not draining issue quickly and easily.
1) Diagnosing Your Problem
The first step is to identify the root cause of the problem. There are a number of reasons why your washing machine might not be draining properly. Some of the most common causes include:
- A blockage in the drain hose
- An issue with the pump
- Improper Drain Height
- Poor Load Distribution
- A clogged lint trap
- Plumbing Problems
- A problem with the washing machine’s timer
You have to determine which of these is the cause of your washing machine not draining properly. To do this, you will need to troubleshoot each potential issue until you find the root cause.
2) Clearing a Blockage in the Drain Hose
One of the most common reasons for a washing machine not draining is a blockage in the drain hose. Over time, lint and other debris can build up in the hose-preventing water from flowing through. To clear a blockage in the drain hose, you will need to remove it from the washing machine and flush it out with a garden hose.
The first step is to disconnect the power to your washing machine. Once the power is off, you can remove the drain hose. Most hoses are located on the back of the washing machine. Once you have located the hose, detach it from both the washing machine and the drainage pipe.
Once the hose is detached, you can use a garden hose to flush out any debris that might be blocking it. Simply turn on the water and insert the hose into one end of the drain hose. The water pressure should be enough to dislodge any debris that is blocking the hose.
3) Checking the Pump
If your washing machine has a pump, it could be the source of the problem. The pump is responsible for moving water from the tub to the drain hose. If the pump is damaged, it will not be able to do its job properly. To check the pump, you will need to remove it from the washing machine and test it with a multimeter.
The acceptable range for most washing machine pumps is between 5 and 10 ohms. If your multimeter reads outside of this range, the pump is likely damaged and will need to be replaced.
4) Adjusting the Drain Height
If your washer is not draining properly, the problem could be the drain height. The drain height is the distance between the floor and the center of the drain hose. If this distance is too great, gravity will prevent the water from draining properly. To fix this problem, you will need to lower the drain height.
Most washing machines have adjustable legs. To lower the drain height, you will need to turn the legs clockwise. This will lower the machine and bring the drain hose closer to the floor.
5) Improving Load Distribution
The cause of your washing machine not draining effectively might be poor load distribution. When clothes are poorly distributed in the tub, they can block the drain hose. As a result, water is not able to flow through and will build up in the tub. To fix this problem, you will need to redistribute the clothes in the tub.
Start by opening the washing machine door and distributing the clothes evenly around the tub. Once the clothes are evenly distributed, close the door and run the cycle again.
6) Cleaning the Lint Trap
If your washing machine has a lint trap, it’s possible that the lint is clogging up the drainage system. The lint trap is usually located near the top of the washing machine, and you can access it by removing the cover. Use a brush or vacuum to clean out the lint trap.
7) Addressing Plumbing Problems
If your washing machine is still not draining, the problem might be with your plumbing. To rule out this possibility, you will need to check the drainage pipe. The drainage pipe is usually located behind the washing machine. To check it, remove the cover and look for any blockages. If you find a blockage, use a plunger to remove it.
If your washing machine is still not draining properly, you may need to call a professional. They will be able to diagnose the problem and fix any underlying issues.
Washing Machine Repair Near You
We are a nationwide company that specializes in appliance repair. Our technician will come to your home, diagnose the problem, and provide a solution. We have experience with all types of appliances, including washing machines, dryers, refrigerators, and dishwashers. Schedule a repair today!
For More Information About Washing Machine Repair:
Advance Appliance Repair
1 Elmhurst Ave Unit 555
North York, ON M2N 6B1
(647) 363-5208
