Toronto Appliance Repair | Advance Appliance Repair

24/7 Appliance Repair Service In Greater Toronto Area 

Advance Appliance Repair Toronto

GE Fridge Is Not Cooling But Light is On

Many people find that refrigerators are a useful convenience in their lives. They can store food and drinks for long periods of time, and keep them cold so that they are refreshing to consume. However, sometimes refrigerators can have issues where they are not cooling properly. This can be frustrating, as it can cause the food and drinks inside to spoil.

You may check a list of possible problems at home with the few equipment and some basic knowledge. The light in your fridge is on because it is receiving power. This does not necessarily mean that the fridge is cooling properly. If your fridge is not cooling, there are a few things you can check before calling a repairman.

electrolux dishwasher repair north york

1) Check Temperature Settings

The first thing you should do is check the temperature settings. Make sure that the fridge is set to a cool enough temperature. It is also possible that the fridge is set too low, which can cause it to stop cooling. If the fridge is set too low, increase the temperature and see if this solves the problem.

Temperature settings are usually located inside the fridge, on the door, or in the control panel. You may need to consult your fridge’s manual to find the exact location.

2) Check for Blockages

Next, you should check for any blockages in the fridge. Blockages can prevent cold air from circulating properly, causing your fridge to warm up.

To check for blockages:

  • Remove everything from the fridge and freezer sections
  • Check the back of the fridge for any obstructions
  • Check the vents on the sides of the fridge and make sure they’re not blocked
  • If you have a self-defrosting fridge, make sure the defrost drain is clear

The blockages could be caused by food, dirt, or other debris. If you find any blockages, remove them and see if the fridge starts cooling properly.

3) Clean the Condenser Coils

If the condenser coils are dirty, they won’t be able to cool the fridge properly. The coils are usually located on the back of the fridge.

To clean the coils:

  • Unplug the fridge and move it away from the wall
  • Locate the coils and use a vacuum to remove any dust or dirt
  • If the coils are very dirty, you can use a coil cleaning brush to scrub them clean
  • Once you’ve cleaned the coils, plug the fridge back in and see if it’s cooling properly.

4) Check the Door Seal

If cold air is escaping from your fridge, it could be because the door seal is damaged. A damaged door seal can cause your fridge to work overtime to keep the temperature inside the fridge consistent, which can lead to the fridge not cooling properly. To check the door seal, open the fridge door and place your hand inside the seal. If you feel a draft, then the door seal needs to be replaced.

5) Problem with Compressor

One of the most common reasons why a fridge is not cooling is because the compressor is not working properly. The compressor is responsible for circulating coolant through the fridge, so if it’s not working, the fridge will not be able to properly cool down.

If you think the problem might be with the compressor, there are a few things you can do to check.

1) First, see if the compressor is running. If it’s not, then that’s likely the problem.

2) Next, check to see if the compressor is getting power. If it’s not, then that could be the issue.

3) Finally, listen to see if the compressor is making any strange noises. If it is, then that could be an indication that something is wrong.

If you think the problem is with the compressor, then you’ll need to call a repairman to come and take a look. It’s not something you’ll be able to fix on your own.

6) Evaporator Fan

If the compressor is running but the fridge is still not cooling, then the problem might be with the evaporator fan. The evaporator fan is responsible for circulating air through the fridge, so if it’s not working, the air inside the fridge will not circulate properly and the fridge will not cool down.

To check if the evaporator fan is working, open the fridge and listen for a humming noise. If you don’t hear any noise, the fan is not working and needs to be replaced.

Final Thoughts

The GE refrigerator is a versatile and reliable appliance. However, like all appliances, it can sometimes experience problems. If your GE fridge is not cooling but the light is on, follow the above steps to troubleshoot the issue. With a little time and effort, you should be able to fix the problem and get your fridge working again.

If the problem persists, or you are unable to fix the issue, contact Advance Appliance Repair for assistance. They can help you fix your fridge quickly. We hope this article was helpful. Thanks for reading!

1 thought on “GE Fridge Is Not Cooling But Light is On”

Comments are closed.

Call Now Button